DIY Boho Necklace

Boho Wrapped Paracord NecklaceBoho Necklace from the book KNITLESS: 50 No-Knit, Stash-Busting Yarn Projects by Laura McFadden, Photograph by Allan Penn

If you’ve read my blog for a while now, it’s no secret I like to knit.  And like most knitters, I have a massive decent yarn stash.  Which always has me asking, “what am I going to do with all this yarn?!”.  My daughter has started making pom-pom monsters with some of it.  But really, how many pom-pom monsters can one make?  So when Running Press reached out to me about KNITLESS I was eager to take a look at it.

There are a lot of great projects in KNITLESS.  One that stood out to me and I thought you would enjoy is the Boho Wrapped Paracord Necklace.  If you’ve looked through any fashion magazines, you know the bohemian trend is very popular right now.  Directions below:

Reprinted with permission from KNITLESS © 2015 by Laura McFadden, Running Press, a member of the Perseus Books Group.

Boho Wrapped Paracord Necklace

“Boho” or “Bohemian” style is all about the layering of accessories. This all-in-one multilayer necklace has that carefree, gypsy feel.

MATERIALS

Hot glue gun with glue sticks
1 yard paracord (tan)
1 paracord closure
5 yards each of lightweight cotton yarn in four colors (pink, light purple, brown, and tan)
5 yards lightweight acrylic yarn (metallic red-orange)
Scissors
Embroidery needle
White craft glue
Variety pack of assorted wooden beads
70 (3 mm) orange wooden beads
3-inch-wide piece cardboard
1 (20 mm) unfinished wooden bead

1. Heat up the hot glue gun with a stick of glue in it, and place a dab of glue on one end of the paracord.

2. Place the end of the paracord into the socket of the closure and hold it in place for a minute until the glue sets up. Repeat to glue the other piece of the closure on the other end of the paracord.

3. Take the tan yarn and hold a tail of about 3 inches of yarn parallel with the paracord, tail facing in. Start wrapping it around the paracord for about 3 inches to secure the tail.

4. Follow Step 3 for all the remaining colors, changing the color of yarn randomly to suit. To attach a new piece of yarn: Cut the old yarn to leave a tail of a few inches. Hold it and the tail of the new yarn against the paracord. Wrap the new yarn around the tails to cover both. The idea is for the colors to have an uneven, random feeling.

5. When you finish wrapping the yarn all the way around the paracord, thread the embroidery needle with the last piece of yarn and sew it through the layer of paracord. Tie a knot in the end of the yarn. Cut the tail and add a small dab of white glue to secure the knot.

6. For the beaded strands in the middle: single thread the embroidery needle with a piece of tan yarn about 18 inches long. Tie a knot in the end, leaving a 6-inch tail. String on a variety of the wooden beads until they measure 6½ inches.

7. Fold the wrapped paracord part of the necklace in half and measure about 4½ inches from the center on both sides. Sew the beads onto the paracord to make a second tier in the necklace, as shown in the photo. Do this on both sides.

8. Using a piece of tan yarn, tie a knot leaving a 6-inch tail. Single thread the yarn and string on 70 of the orange wooden beads (or until the length of strung beads measures 12¼ inches).

9. Sew the beads onto the paracord, about 10½ inches up from the center of the paracord. Do this on both sides. Knot the ends and cut any excess yarn off.

10. FOR THE TASSEL: Wrap the tan yarn around the cardboard about 30 times. Pull the yarn off the cardboard, keeping the shape intact. Cut a 6-inch strand of tan yarn and wrap it around the top of the loops of yarn you just made, tying them in a tight bundle. Tie a knot in the strand of yarn but don’t cut the ends.

11. Slide the 20 mm wooden bead onto the tassel and white glue it in place.

12. Cut the ends of yarn at the bottom of the tassel so they measure about 2 inches from the bottom of the wooden bead.

13. Thread the uncut ends of yarn at the top of the tassel onto the embroidery needle. Wrap the strands around the center of the paracord several times and tie them in a knot. Feed the remaining strands in through the center of the bead to hide them.

TIP: When you are finishing off the ends of your beading, hide them by burying the remaining yarn strands back through the first few beads. Then cut the ends of the yarn. Add a little dab of glue for extra hold.

knitless craft bookIf you liked this project, I would encourage you to check out the other blogs/links below participating in this blog tour.  You’ll be able to see more projects from KNITLESS.  There are even some giveaways for the book!  You can also find more information at Running Press.

9/15 Pretty Things

9/17 She Shoots Sheep Shots

9/18 Knit and Nosh

9/19 Knitty Gritty Savings

9/20 ZakkaLife – You’re here!

9/21 Lorelei’s Blog

9/22 CraftGossip Knitting

9/23 Wendy Knits

9/24 Cut Out + Keep

9/25 Think Crafts!

9/26 Our Daily Craft

9/27 The Crafty Princess Diaries

9/28 Delia Creates

 

One Response to DIY Boho Necklace

Leave a Reply to Alissa Cancel reply

Facebook Feed GoolgePlus Instagram Pinterest Twitter

My Books

Follow on Bloglovin

in all your ways acknowledge Him, and He will make your paths straight - Proverbs 3:6